Промышленное охлаждение - freezart.ru. Схемы и периодика

9. 10. II. 12. 13. 14. 15. 16. 17. 18. 19. 20.

21. 22.

23. 24. 25. 26.

27. 28. 29, 30. 31. 32. 33. 34. 35.

36. 37,

К гл. 3

N. F. МоП and R R. N, Nabano, Rep. Corf. Strength Sol. Phys. Soc 1-9 (1948). . R. M. N. Pelloux and N, J, Grant, Trans. Met. Soc. AIME, 218, 232 (1960). R. F Decker, Proc. Steel Strength. Mech. Symp. Chemax Molybdenum Company, Greenwich, Connecticut Zurich, May 5-6, 1: 147, 1964. R. L. Fleischer, Acta Met., 11, 203 (1963).

B. E. P. Beeston, I. L. Dillamore, and R. E. Smallman, Met. Sci. J., 2, 12 (1968). R. L. Fleischer, The Strengthening of Metals, Reinhold, New York, 1964, p. 93. R Jax, R Kratochvil, and R Haasen, Acfa Met., 18, 237 (1970). J. Friedel, Dislocations, Ptrgamon, Oxford, 1964. R. Ubusch, Acto Met., 20, 917 (1972). R A. Flinn, Acta Met., 6, 631-635 (1958). R. Notdheim and N. J. Grant, J. Inst. Met., 82, 440 (1954). A. Akhtar and E. Teghtsoonian, Met. Trans., 2, 2757 (1971). P. H. Thornton, R. G. Davies, and T. L. Johnston, Met. Trans. 1, 207 (1970). Б. H. Kear, G. R. Uverant, and J. M. Oblak, Trans. ASM, 62. 639 (1969). R. G. Davies and N. S. Stoloff, TMS-AIME, 233, 714 (1965). O. Noguchi, Y. Oya, and T. Suzuki, Met. Trans. A, 12A, 1647 (1981). N. S. Stoloff and R. G. Davies, Prog. Mat. Set., 13(1), 3 (1966). D. M. Wee, O. Noguchi, Y. Oya, and T. Suzuki, Trans. Jap. Inst. Met., 21, 237 (1980). L. R. Curwick, Ph.D. Thesis, University of Minnesota, 1972.

R. K. Ham, Ordered Alloys: Structural Applications and Physical Metallurgy, Claitors, Baton Rouge, LA, 1970, p. 365.

H. Gleiter and E. Hombogen, Mat. Sci. Eng., 2, 285 (1968).

L. M. Brown and R. K. Ham, Strengthening Methods in Crystals, Elsevier, Amsterdam 1971 p. 9.

V. Marteus and E. Nembach, Acta Met., 23, 149 (1975). S. M. Copley and B. H. Keii, TMS-AIME, 239, 977 (1967). S, M. Copley and B. H. Kear, TMSAIME, 239, 984 (1967).

G, R. Uverant, M. Gell, and S. W. Hopkins, Proc. Sec. Int. Conf. Strength Met Alloys, 3, 1141 (1970).

V. A. Phillips, 5cr. Met., 2, 147 (1968).

H. Gleiter and E. Hombogen, Phys. Stat. Sol., 12, 251 (1965).

D. Raynor and J. M. Silcock, Met. Sci. J., 4, 121 (1970); see also ref, 22. J. L. Castagne, A. Pineare, and M, Sidzingre, C. R. Acad. Sci., C263, 1465 (1966). V. Gerald and H. Haberkom, Phys. Stat. Sol., 16, 675 (1966). H. Gleiter, Z. Angew. Phys., 23(2), 108 (1967), V. Gerold, Acta Met., 16, 823 (1968).

E. Nembach and G. Neite, Prog Mat Sci (in press).

E, Orowan, Symposium on Internal Stresses in Metals, Institute of Metals, London 1948 dd 451-453.

A, Kelly and R. B. Nicholson, Prog. Mat. Sci., 10(3), 151 (1963).

B, Wilcox and A. H. Clauer, in The Superalloys, C. T. Sims and W. C. Hagel (eds) Wiley New York, 1972.

B, A, Wilcox and A. H. Clauer, Oxide Dispersion Strengthening, Gordon & Breach New York 1968, p. 323.

J, P. Morse and J. S. Benjamin, in New Trends in Materials Processing, ASM, Metals Park OH 1976, p. 165.

40. E. Arzt and R. F Singer, in Superalloys 1984, M. Gell, C. S. Kortovich, R. H. Bricknell, W. Б. Kent, J. F Radavich (eds.) TMS-AIME, New York, 1984, p. 367.

41. R. R. Jensen and J. K. Tien, in Metallurgical Treatises, J. K. Tien, J. F Elliott (eds.) TMS-AIME, Warrendale, PA, 1981, p. 529.

42. R. F Decker and J. R. Mihalisin, Trans. ASM, 62, 481 (1969).

43. E. Nembach, K. Suzuki, M. fchihara, and S. Takeuchi, Philos. Mag. A, 51, 607 (1985).

44. R Beaidmore, R. G, Davies, and T. L. Johnston, TMSAIME, 245, 1537 (1969),

45. L. R. Comwell, J, D. Embury, and G. R. Purdy, in Ordered Alloys: Structural Applications and Physical Metallurgy, B. H. Kear et al. (eds.), Claitors, Baton Rouge, LA, 1970, p. 387.

46. M. Donachie, Source Book on Superalloys, ASM, Metals Park, OH, 1984, p. 7.

47. C. L. Corey and B. Lisowsky. TMS-AIME, 239. 239 (1967).

48. V. A. Phillips, Philos. Mag., 16, 117 (1967).

49. R. G. Davies and T. L. Johnston, Ordered Alloys: Structural Applications and Physical Metallurgy, Б. H. Kear et al. (eds.), Claitors, Baton Rouge, LA, 1970, p. 447.

50. W. J. Mitchell, Z. MetaUkd., 57. 586 (1966).

51. Y. G. Sorokina and S. A. Yuganova. Met. Sci. Heat Treat., 456 (1968).

52. V. Munjal and A. J. Aidell, Acta Met., 23, 513 (1975).

53. I. L. Mirkin and O. D. Kancheev. Met. Sci. Heat Treat., (1,2), 10 (1967).

54. G. N. Maniar and J. E. Bridge, Met. Trans., 2, 95 (1971).

55. C. C. Uw and M. J. Blackburn, Met. Trans. A, llA. 495 (1980).

56. M. N. ТЪопчяоп and J. W. Edington, Proc. 2nd Int. Conf. Strength Met. Alloys, 3, 1150(1970).

57. P H. Thornton and R. G. Davies. Met. Trans., 1, 549 (1970).

58. G. R. Uverant and Б. H. Kear, Met. Trans., 1, 491 (1970).

59. O. D. Sherby and R M. Burke, Prog. Mat. Sci., 13, 325 (1967).

60. A. K. Mukherjee, J. E. Bird, and J. E. Dom. Trans. ASM, 62, 155 (1969).

61. A. K. Mukherjee in Treatise on Materials Science and Technology, Vol. 6, Plastic Deformation ofMeuds, R. J. Arsenault (ed.). Academic, New Yoric. 1975, p. 163.

62. M. Malu and J. K, Tien, Scripta Met., 9, 1117 (1975).

63. K. R. WiUiams and Б. Wilshire, Met. Sci. J., 7, 176 (1973).

64. J. D. Whittenbeiger, Met. Trans. A, 8A. 1155 (1977).

65. J. K. Tien and S. M. Copley. Met. Trans., 2, 543 (1971).

66. J. K. Tien and R. R Gamble. Met. Trans., 3, 2157 (1972).

67. D. D, Rsarson, B. H. Kear, and F. D. Umkey, in Creep Fracture of Engineering Materials and Structures, Pineridge, 1981, p. 213.

68. D. D. Pearson, private communication.

69. T Б. Gibbons and Б. E. Hopkins, Met. Sci: J., 5, 233 (1971).

70. J. J. Jackson, M. J. Donachie, R. J. Henricks, and M. Gell, Met. Trans. A, 8A, 1615 (1977).

К гл. 4

1. D. Coutsouradis, Meeting Requirements for High Temperature Gas Turbines, A Challenge to Metallurgists, AGARD Propulsion and Energetics Panel Meeting; Florence, September 1970.

2. R. F Decker, Strengthening Mechanisms in Nickel-Base Superalloys, Oimax Molybdenum Company Symposium, Zurich, May 5-6, 1969.

3. C. T Sims, ASME Technical Publication 70-GT-24, May 1970.

4. C. T Sims. J. Met. /в, 1119 (October 1966).

5. L. Brewer, in High-Strength Maurials, V. F Zackay (ed), Wiley. New Yoric. 1965.

6. C. Tan and J. Marshall, Phase Relationships m High-Temperature Alloys. AIME Fall Meeting, Chicago, IL, October 30-November 3, 1966.

7. J. Mihalisin and D. ftoquine, Phese Tnuisfonnation in Nicltel-Base AUoys, Inttmational Symposium on Stracnjral SUbility in Superalloys. Seven Springs, PA, 1968.

8. O. H. Kriege and J. M. Bans, Trans. ASM, 62, 195 (March 1969).

9. W. Loomis, Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 1969.

10. B. E. R Beeston, I. L. Dillamore, and R. E. Smallman, Met. Set. J., 2, 12 (I960).

11. B. E. R Beeston and L. France, J. Inst. Met., 96, 105 (1968).

12. M. V. Pridantsev, /rv. Acad. Nauk SSSR Met., S, 115 (l%7).

13. W, C. Higel ind H. J. Bealtie, Iron and Steel Institute Special Report, London, 64, p. 98.

14. J. R. Mihalisin, personal communication (May 1967).

15. W, B. Kent, Mechanical Properties and Structural Characteristics of NASA lib, AIME Annual Meeting, Cleveland, OH, October 1970,

16. V. A. Phillips, personal communication (1968).

17. R. F Decker and C. G. Bieber, Symposium on Electron Metallography, ASTM STP 262, 1966.

18. C, T. Sims, The Role of Reftectoiy Metals in Austenitic Superalloys, 6th Plansee Spminar, Reutte, Austria, June 1968.

19. J. Heslop, Cobalt, 24, 128 (1964).

20. M. Fleetwood, personal communication.

21. E. A. Fell, Metallurgia. 63, 157 (1961).

22. W, I. Mitchell, Z. Metallkd, 55, 613 (1964).

23. R. F Decker and J. W. Freeman, Trans. AIME, 218, 277 (I960),

24. J. P. Rowe and J. W. Freeman, in Proceedings of the International Conference on Creep, Institute of Engineers, London, 1963.

25. W. B. Pearson and W. Hume-Rotheiy, /. Inst. Met., 80, 641 (1951-1952).

26. W. Betteridge, The Nimonic Alloys, Arnold, London, 1959.

27. A, Havalda, Trans. ASM, 62, 581 (1969).

28. C, C. Clark and J. S. Iwanski, Trans. AIME. 215, 648 (1959).

29. J. R. Mihalisin and R. F Decker, Trans. AIME, 218, 507 (I960).

30. H. L. Eiselstein, ASTM Spec. Tech. Publ. 369, Philadelphia, (l%5).

31. F G, Haynes, J. Inst. Met., 90, 311 (1961-1962),

32. E. L. Raymond, Trans. AIME, 239, 1415 (1967).

33. W. J. Boesch and H. B. Canada, Precipitttion ReacUons and Stability of Nij Cb in Inconel Alloy 718, International Symposium on Structunl SUbility in Superalloys, Seven Springs, 1968.

34. F J. Rizzo and J. D. Buzzanell, Effect of Chemistry Variations on the Stnicmral SUbility of Alloy 718, International Symposium on StnicUiral Subility in Superalloys, Seven Springs, PA, 1968.

35. E. A, Fell, W, I. Mitchell, and D. W. Wakeman, Iron Steel Inst. Spec. Rep., 70, 136 (1969).

36. R. F Decker and J. W. Freeman, personal communication.

37. R. W. Smashey, personal communication.

38. W. J. Boesch and H. B. Canada, J. Met., 20, (April 1968),

39. B. J. Piearcey and R. W. Smashey, Trans. AIME, 239, 451 (1967),

40. W. L. Clarke, Jr. and C. W. Titus, Long-Time Stability of Hastelloy X, ASM Metal Congress, Oeveland, OH, October 1967.

41. V. A. Phillips, personal communication.

42. J. R. Mihalisin, Trans. AIME, 239, 180 (1967).

43. H. E. Collins, Relative Subility of Carbide and Intermeullic Phases in Nickel-Base Superalloys, International Symposium on Stnictural Subility in Superalloys, Seven Springs, PA, 1968.

44. H. J. Beattie. Jr. and F L. VerSnyder, Trans. ASM, 49, 883 (1957).

45. H. J. Beattie. Jr. and W. C. Hagel, Trans. AIME, 233, 277 (Febmaiy 1965).

46. S. T. Wlodek, Trans. ASM, 57, III (1964).

47. E. W. Ross, Recent Research on IN-100, AIME Annual Meeting. Dallas, TX (February 1963).

48. L. A. Weisenberg and R. J, Morris, Met. Prog., 78, 70 (I960).

49. H. E. Collins, Relative Subility of Carbides and Interaietallic Phases in Nickel-Base Superalloys, International Symposium on Stnictural Subility in Superalloys, Seven Springs, PA, 1968.

50. C. T. Sims, unpublished work.

51. E. G. Richards, J. Inst. Met., 96, 365 (1968).

52. C, G. Bieber, The Melting and Hot Rolling of Nickel and Nickel Alloys in Metals Handbook, ASM, Cleveland, OH, 1948.

53. R. W. Koffler, W. J, Pennington, and F M. Richmond, Res. and Dev. Dep Rep. No., 48 (1956). Universal-Cyclops Steel Corporation, Bridgeville, PA,

54. R. F Decker, J. P Rowe. and J W. Freeman. NACA Technical Note 4049. Washington. DC. June 1957.

55. K. E. Volk and A. W. Franklin. Z. Metallkd, 51, 172 (I960).

56. B. S. Natapov. V. E. Olshanetskli, and E. R Ponomarenko, Met. Sci and Heat Treat., 1, II (1965).

E. G. Richards and P L, Twigg. Influence of Boron on a Ni-Cr Austenitic Alloy, 11th Creep Colloquium, Saclay, France, 1967.

F C. Hull and R. Stickler. Effects of N, B, Zr. and V on the Microstructure. Tensile and Creep-Rupnire Properties of a Cr-Ni-Mn-Mo Sttintess Steel in Joint International Conference on Creep, Institute of Mechanical Engineers, London, 1963.

59. C. Cmssard, J. Plateau, and G, Genry, The Influence of Boron in Austenitic Alloys in Joint International Conference on Creep, Instimte of Mechanical Engineers, London 1963.

60. J. K. Tien and R. R Gamble, Met. Trans., 2, 1663 (1971).

61. R. W. Smashey, Effect of Long Time, High Stress Exposures on the Microstnicture of Ren<-80 Alloy, AIME Annual Meeting, Cleveland OH. October 1970,

62. H. J. Murphy. C. T Sims and G. R. Heckman. Trans AIME, 239, 1961-78 (1967).

63. G. R. Heckman, ASME Preprint 67-GT-55, Gas Turbine Conference and Products Show, Houston, TX, March 1967.

64. J. W. Wood, personal communication.

65. E. W. Ross, J. Met., 19, 12 (December l%7).

66. J. A, Scheibel, C. L. White, and M. H. Yoo. Met. Trans., 16A, 651 (1985).

К гл. 5

1. F R. Monal, 20, 18 У. Met. (July 1968).

2. J. C. Freche, R. L. Ashbrook, and S,. J. Ю1ша, Cobalt, 20, 114 (1963).

3. L. A. Pugliese and J. R Stroup, Cobalt, 43, 80 (June 1963).

4. H. Monow. W. R Danesi. and D, L. Sponseller. Cobalt, 4, 93 (1973).

5. S. R Rideout. W. D. Manly. E, L. Kamen. B. S. Lement. and R A. Beck. Trans. AIME, 191, 872 (1951).

6. R. H. Nafziger and R. L. Lincoln, Cobalt, 4, 79 (1974).

7. A. Giamei. J. Bunna. and E. J. Freise. Cobalt, 39, 88 (June 1968).

8. R. Kamel and K. Halim. Phys. Slat. Sol., 15, 63 (1966).

9. F R. Monal, Cobalt and Cobalt Alloys, Cobalt Information Center. Columbus. Ohio. 1967.

10. S. T Wlodek, Trans. AIME, 56, 287 (1964).

11. H. J. Goldschmidt. J. Iron SteelInil., 160, 345 (1948).

12. C. T Sims. J. Met., 21, 27 (1969).

13. D. Coutsouradis, J. Int. Appl. Cob.. Bnaelles, 21, 1-19 (June 1964).

14. W. Koster and F Spermer, Arch. Eisenhuiienw., 26, 555-559 (1955).

15. B. Lux and W. Bollmann, Co/wft, 42, 3 (March 1969).

16. R. B. Herchenroeder, Haynes Alloy No. 188 Aging Characteristics, International Symposium on Structural Stability in Superall<s, Seven Springs, PA, September 1968.

17. С. Register, D. Coutsouradis, and L. Habraken, Cobalt, 34, 3 (March 1967).

18. R Viatour, J. M. Drapier, D. Coutsouradis, and L. Habraken, Cobait, 51, 67 (June 1971).

19. J. M. Blaise, R-Viatour, and J. M. Dnier, Cobalt, 49, 192 (December 1970).

20. J. M. Drapier and D. Coutsouradis, Cobalt, 39, 63 (June 1968).

21. H. J. Beattie, Jr. and W. C. Hagel, Trans. AIME, 221, 28 (1961).

22. R. B. Herchenroeder and W. T. Ebihara, ASM Congress, Detroit, Ml, October 1968.

23. E. Hall and S. Algie. J. Inst. Mel. .4,61 (1966).

24. D. L. Klaistrom, Superalloys 1980, ASM, Metals Park, OH. 1980, p. 131.

25. R C. Hagan, H. W. Antes. M. D. Boldy, and J. S. Slaney, Superalloys 1984, TMS-AIME Wanendale. PA. 1980. p. 623.

26. M. J. Woulds and T. R. Cass. Cobalt, 42, 3 (March 1969).

27. J. M. Drapier. V, LeRoy. C. Dupont. D. Coutsouradis, Cobalt, 41, 199 (December 1974).

28. R. F. Vandermousen. P Viatour. J. M. Dnipier, and D. Coutsouradis. Cobalt 1, б (1974)

29. J. C. Fteche and R. L. Ashbrook. Cobalt, 2, 33 (1973).

30. J. M. Drapier. D. Coutsouradis. and L. Habraken. Cobalt, 53, 197 (December 1971).

31. D. A. Woodford and C. J. McMahon. Jr.. Proceedings cf the Second InUrnational Софгепсе Strength Metals and Alloys-Asihmar. ASM. Metals Park. OH. 1970. p. 1067.

32. D. A. Woodford and R. H. BrickneU. Superalloys 1980, ASM, Metals Рмк. OH. 1980, p. 633.

2. 3, 4. 5 6,

7, 8. 9,

13. 14. 15. 16. 17. 18.

20. 21. 22.

К гл. 6

C. R SuUivan and M. J. Donachie, J. Met. Eng. Q, 11, I (1971).

D. L. Юаг51гот, H. M. Tawancy, and M. F Rothman. J. Met. Sol. AIME, 553 (1984). D. F Smith. D. J. TUIick. and J. R XlcGrath, ASME, 85-IGT-I40, 1985.

D. Raynor and J. M. Silcock. Met. Sci. У.. 14, 121 (1970). D. J. Dyson and B. Holmes, JISl, 208, 469 (1970).

R. F Decker, in Symposium: Steel Strengthening Mechanisms, Zurich 1969, Climax Molybdenum, Greenwich, CT, 1970, pp. 147-170.

K. J. Irvine, D. T. Uewellyn. and R B. Pickering, JISl, 199, 153 (1961). M. C. Chaturvedi and Y. Han, Met. Sci., 17, 145 (1983).

D. F Paulonis, J. M. Oblak, and D. S. Duvall. Trans. ASM, 62, 611 (1969). Y. Han, R Deb, and M. C. Chaturvedi, Met. Sci., 16, 555 (1982).

R, Cozar and A. Pineau, Met. Trans., 4, 47 (1973).

E. L. Raymond and D. A. Wells. SuperalloysProcessing, Battelle Columbus Laboratories, MCIC 72-10, Columbus, Ohio 1972. pp. NI-N2I.

H. J. Wagner and A. M. Hall, DMIC-217, 1965.

V Ramaswamy. R R. Swann, and D. R. West, J. Uss-Common Met., 27, 17 (1972),

B. S. Naupov, V. E. Orshanetskii, and E. R Ponomarenko, Met. Sci. Heat Treat, 1-2, 11 (1966)

J. R. Mihalisin and R. F Decker, Trans. TMSAIME, 218, 507 (I960).

J. G. Hoag, DMIC-84. Battelle Memorial InsUtute, Columbus. OH, Febraaiy 6, 1961.

G. Chen et al., in Superalloys 1984, M. GeU, C. S. Kortovich, R. H. Bricknell. W. B. Kent, and J. F Radavich (eds.J, TMS-AIME. Warrendale. PA, 61 (1984).

J. M. Moyer in Superalloys 1984, M. Gell, C. S. Kortovich, R. H. Bricknell. W, B. Kent, and

J. F Radavich (eds.). TMS-AIME, Warrendale. PA, 443 (1984).

D. R. Muzyka. Met. Eng. Q., 11, 12 (1971).

R. F Decker and R. R. DeWitt, J. Met., 17(2), 139 (1965),

H. J. Beattie, Jr. and W. C. Hagel. Precipitation Processes in Steels, Iron and Steel Institute London, 1959, pp. 108-117.

H. J. Beattie, Jr. and W. C. Hagel, Trans. TMS-AIME, 233, 277 (1965).

24. H. L. Eiselstein, Advances in the Technology of Stainless Steels and Related Alloys, STP 369* ASTM, Philadelphia, PA. 1965, pp. 62-67.

25. C. C. Clark and J. S. Iwanski, Trans. AIME, 215, 649 (1959).

26. J. F Radavich, in Advances in X-ray Analysis, Vol. 3. W. M. Mueller (ed.). Plenum, New Yoric, I960, pp. 365-375.

27. J. M. Silcock and N. J. Williams, JISl, 204, 1100 (1966).

28. G. B. Heydt, Trans. ASM, 54, 220 (1961).

29. G. N. Manier and H. M. James, Trans. ASM, 57, 368 (1964).

30. R. F Decker and J. R. Mihalisin, Trans. ASM, 62, 481 (1969).

31. J. M. Oblak, D. F Paulonis, and D. S. DuvaU, Met. Trans., S, 143 (1974).

32. I. Kiricman and D. H. Warrington. Met. Trans., 1, 2667 (1970).

33. Carpenter Technology Corporation, unpublished research, Reading, PA.

34. B. R. Claric and F Б. Pickering, JISl, 205, 70 (1967).

35. F G. WUson and F Б. Pickering, JISl, 204, 628 (1966).

36. L. K. Singhal and J. W. Martin. JISl, 205, 947 (1967).

37. D. Dulieu and B. Aronsson. Jerkont. Ann., ISO, 787 (1966).

38. R. F Decker and S. Floreen. in Precipitation From Iron-Base Alloys, G. R. Speich and J. B. Claric (eds.). Gordon & Breach, New Yoric, 1965. p. 69.

39. F G. Wilson and F Б. Pickering. JISl, 207, 490 (1969),

40. H. J. Beattie, Jr. and W. C. Hagel, Trans. TMS-AIME, 209, 911 (1957).

41. I. Kiricman, JISl, 207, 1612 (1969).

42. J. F Baricer, E. W. Ross, and J. F Radavich, J. Met, 22(1), 31 (1970).

43. J. R Stroup and R. A. Heacox, J. Met., 21(11), 46 (1969).

44. R. T. Weiner and J. J. Irani, Trans. ASM, 59, 340 (1966).

45. E. E. Brown, R. C. Boettner, and D. L. Ruckle, Superalloys-Processing, Battelle Columbus Uboratories, Columbus, Ohio MCIC-72-IO, 1972.

46. J. H. MoU. G. W. Maniar, and D. R. Muzyka, Met. Trans., 2, 2153 (1971).

47. G. L. R. ОшЬег, С. L. Jones, and A. J. Dykes, 433 (1984).

48. E. E. Brown, J, E. Stulga, L. Jennings, and R. W. Salkeld, 159 (1980).

49. G. K. Bouse and M. F Collins, Nov. 1985 unpublished woric.

50. W. J. Boesch and H. B. Canada, J. Met., 21(10), 34 (1969).

51. D. S. Keiserand H. L. Brown, Idaho National Engineering Laboratory Report #ANCR 1292-UC-25, 1976.

52. C. H. Lund, Physical Metallurgy of Nickel-Base Superalloys, DMIC-153, Columbus, OH, 1961.

53. C. P Sullivan and M. J. Donachie, Jr., Met. Eng. Q., 7, 36 (1967).

54. G. R Sabol and R. Stickler, Phys. Stat. Sol., 35, II (1969).

55. C. T. Sims, J. Met., 18(10), 1119 (1966),

К гл. 7

1. F L. VerSynder and R. W. Guard, Trans. ASM, 52, 485 (1960).

2. F L. VerSnyder and M. E. Shank, Mat. Sci. Eng., 6, 213 (1970).

3. M. Gell, D. N. Duhl, and A. F Glamti, in Superalloys 1980. Proceedings ofthe Fourth International Symposium on Superalloys, J. K. Tien et al. (eds.), ASM, Metals Paric, OH, 1980, p. 205.

4. J. E. Northwood, Metallurgia, 46, 437 (1979).

5. M. Gell and D. N. Duhl, in Processing and Properties of Advanced High-Temperature Alloys, S. Allen et al. (eds.). ASM, Metals Park, OH, 1986, p. 41.

6. S. E. Hughes and R. E. Anderson, Technical Report AFML-TR-79-4146, on USAF Contract F33615-76-C-5136, 1978.

7. J. S. Erickson, W. A. Owczarski, and P M. Curran, Met. Prog., 99, 58 (1971),

8. D. N. Duhl and C, P. Sullivan, J. Met., 23, 38. (1971).

9. S. M. Copley, A. F. Giamei, S. M. Johnson, and M. F Hombecker, Met. Trans.*l, 2193 (1970).

10. D. H, Maxwell, F J. Baldwin, and J. F Radavich, Metallurg. Met. Form., 42, 332 (1975).

11. J. J. Jackson, M. J. Donachie, R. J. Henricks and M. Gell, Met. Trans. A, 8A, 1615 (1977).

12. D. A. Woodford, Met. Trans. A, 12A, 299 (1981).

13. C. S. Giggins and F S. Pettit, J. Electr. Soc., 118, 1782 (1971).

14. C. S. Wukusick and J. F Collins, Mater. Jies. Stand., 4, 637 (1964).

15. G. W. Goward, in Proceedings of the Symposium on Properties of High Temperature Alloys with Emphasis on Environmental Effects, Z. A. Foroulis and F. S. Pettit (eds.). Electrochemical Society, Princeton, NJ, 1976, p. 806.

16. J. F. Nye, Physical Properties of Crystals, Oxford University Press, London, 1957.

17. M. McLean, Directionally Solidified Materials for High Temperature Service, The Metals Society, London, 1983.

18. C. H. Wells. Trans. ASM. 60, 270 (1967).

19. B. H. Kear and B. J. Piearcey, Trans. Met. Soc. AIME, 239, 1209 (1967).

20. S. M. Copley and B. H. Kear, Trans. Met. Soc. AIME, 239, 984 (1967).

21. D. M. Shah and D. N. Duhl, in Superalloys 1984, Proceedings of the Fifth International Symposium on Superalloys, M. Gell et al. (eds.), TMS-AIME, Warrendale, PA, 1984, p. 105.

22. G. R. Leverant and D. N. Duhl, Met. Trans., 2, 907 (1971).

23. E. G. Richards, / Inst. Met., 96, 365 (1968).

24. T. B. Gibbons, Met. Technol., 8, 472 (1981).

25. D. A. Spera, M. A. Howes, and P T. Bizon, Thermal Fatigue Resistance of 15 High Temperature Alloys-Determined by the Fluidized-Bed Technique, NASA TMX-52975, Cleveland, OH 1971.

26. S, W. Hopkins, in Thermal Fatigue of Materials and Components, D. A. Spera and D. F. Mowbray (eds.), ASTM STP 612, American Society for Testing and Materials, Philadelphia, PA, 1976, p, 157.

К гл. 8

1. S. T. Wlodek, Trans. ASM, 57, 110 (1964).

2. E. W. Ross, Recent Research on IN-100 AIME Annual Meeting, Dallas, TX, February 1963.

3. H. J. Beattie, Jr. and W. C. Hagel, Trans. AIME, 233(2), 277 (1965).

4. H. P. Murphy, C. T. Sims, and G. R. Heckman, TMS-AIME, 239, 1961 (1967).

5. L. R. Woodyatt, C. T. Sims, and H. J. Beattie, Jr., TMS-AIME, 236, 519 (1966).

6. H. J. Beattie, Jr. and W. C. Hagel. TMS-AIME, 221, 28 (1961); 215, 973 (1959).

7. N. T. Wagenheim, Cobalt, 48, 129 (1970).

8. R. F Decker, Strengthening Mechanisms in Nickel-Base Superalloys, Climax Molybdenum Company Symposium, Zurich, May 5 - 6, 1969,

9. E. W. Ross, J. Met, 19, 12 (December 1%7).

10. H. M. Fox, The Stnicture of M-252 After Exposure for 1,000,000 Hours, AIME Annual Meeting, Cleveland, OH, October 1970.

11. R. L, Dreshfield and R. L, Ashbrook, NASA TN D-5185, April 1969; NASA TN D-6015, September 1970.

12. J. R. Mihalisin, C. G. Bieber, and R. T Grant, TMS-AIME, 242, 2399 (1968).

13. H. E. Collins and C. S, Kortovich, Research on Microstnicniral Instability of Nickel-Base Superalloys, Interim Engineering Progress Report 5, U,S,A,E Contract AF33(615)-5126, TRW, Inc, October 1967,

14. C, T Sims, J. Met., 18, 1119 (October 1966).

15. L. Pauling, Phys. Rev., 54, 899 (1938).

16. W. Hume-Rothery, The Structure of Metals and Alloys, The Institute of Metals, London, 1954. 380

17. C, Kittel, Introduction to Solid State Physics, Wiley, New York, 1956, p, 329.

18. P Greenfield and P A, Beck, TMS-AIME, 200, 253 (1954).

19. D. K. Das, S. P Rideout, and P A. Beck, TMS-AIME, 194, 1071 (1952).

20. P Greenfield and P A, Beck, TMS-AIME, 206, 265 (1956),

21. A. H. Sully and T J. Heal, Research, 1, 228 (1948).

22. D. S. Bloom and N. J. Grant, TMS-AIME, 197, 88 (1953).

23. D. P Shoemaker, C. B. Shoemaker, and F C. Wilson, Acta Crysiallogr., 10, 1 (1957).

24. W. J. Boesch and J, S, Slaney, Met Prog., 86(1), 109 (1964).

25. S. W. K. Shaw, Met. Prog., 47 (March 1979).

26. J. Slaney, A General Method for the Prediction of Precipitate Compositions, International Symposium on Stnictural Stability in Superalloys, Seven Springs, PA, September 4- 6, 1968.

27. R. F Decker and C. G. Bieber, Microstnicture of a Cast Age-Harfenable Nickel Chromium Alloy, Symposium on Electron Metallography ASTM Special Technical Publication 262, American Society for Testing and Materials, Philadelphia, PA.

28. R. W. Guarf and J. H. Westbrook. Trans. AIME, 215, 807 (1959).

29. C. H. Lund, M. J. Woulds, and J. Hockin, Cobalt and Sigma: Participant, Spectator, or Referee? International Symposium on Stnictural Stability in Superalloys, Seven Springs, PA, September 4 - 6, 1968.

30. H. J. Murphy, C. T. Sims, and A. M. Beltran, J. Met., 20, 46 (November 1968).

31. M. Morinaga, N. Yukawa, H. Adachi, and H. Ezaki, TMS-AIME, Warrendale, PA, 1984, p, 525,

32. R. Dreshfield, Estimation of Conjugate у and y Compositions in Ni-Base Superalloys. NB5 SP-496, January 10-12. 1977.

33. R. Banows and J. Newkirk. Met. Trans., 3, 2889 (1972).

34. E. Machlin and J. Shao, Sigma-Safe; A Phase Diagram Approach to the Sigma Phase Problems, personal communication, 1977.

35. W. Wallace, Met. Sci.. 9, 547 (1975).

36. P. Cowley. Direct Measurement of The Stability of Alloys, National Gas Turbine Establishment. Hants. England, personal communication.

37. J. T Gow and J. E. Haider, TMS-AIME, 30, 855 (1942).

38. C. T. Sims, J. Met., 21, 27 (December 1969).

39. A. M. Beltran, General Electric Co., private communication.

40. R, B. Herchenroeder, Haynes Developmental Alloy No. 188 Aging Characteristics, Intemational Symposium on Stnichiral Stability in Superalloys, Seven Springs, PA, September 4-6, 1968,

К гл. 9

1. G. L. Gamer and J. L. Smith, EPRI Contract Report, Palo Alto, CA, RP-2058-4, 1984. .2. I. L, W. Wilson and T R! Mager, Corrosion 42, 352 (1986).

3. S. Floreen and J. L. Nelson, Met. Trans. A, 14A, 133 (1983).

4. C. A. Grove and L. D. Petzold, ASM J. Mat. Ener. Sys., 7, 147 (1985).

5. R. D. Kane, M. Watkins, D. F Jacobs, and G. L. Hancock, Corrosion, 33, 309 (1977).

6. B. J. Berkowitz. and R. D. Kane, Corrosion, 36, 24 (1980).

7. R. J. Coyle, J. A. Kargol, and N. F Fiore, Met. Trans. A, 12A, 655 (1981).

8. R. A. Mulford, Met. Trans. A, 14A, 865 (1983).

9. A. W. Thompson and J. A. Brooks, Met. Trans. A, 6A, 1431 (1975).

10. S. Floreen, J. M. Davidson, and P. E. Moiris, Int, Nickel Co., Sterling Forest, NY, unpublished.

11. G. Economy, R. J. Jacko, A. W. Юе1п, and F W. Pement, Presented at NACE Corrosion 85, Boston, MA, 1985.

12. M. H. Yoo and H. Trinkhaus, Met. Trans. A, 14A, 547 (1983).

13. G. H. Edwarfs and M. F Ashby, Acta Met., 27, 1505 (1979).

14. D. В. Gooch, J. R. Haigh. and B. C. King, Met. Sci., П, 545-550 (1977).

15. H. Riedel and J. R. Rice, Fracture Mechanics, ASTM STP 700, American Society for Testing and Materials, niiladelphia, PA, 1980, p. 112.

16. K. Sadananda and R Shahinian, J. Eng. Mater Tech., 100, 381 (1978).

17. S. Floreen, Elastic-Plastic Fracture Second Symposium, American Society for Testing and Materials, Philadelphia, PA, 1983, p. 708.

18. S. Floreen and R. H. Kane, Fat. Eng. Mat. Struct, 2, 401 (1980).

19. S. Floreen and R. Raj, Flow and Fracture at Elevated temperances, ASM, Metals Park, OH, 1985, p. 383.

20. R. R Skelton and J. I. Bucklow, Met. Sci., 12, 64 (1978).

21. R. H. Bricknell and D. A. Woodford, Acta Met., 30, 257 (1983).

22. R. H. Bricknell, R. A. Mulford, and D. A. Woodfoid, Ш1. Trans. A, 13A, 1223 (1982).

23. R. H. Bricknell and D. A. Woodford, Met. Tranf. Л, Ш, 425 (1981).

24. R. R Messmer and C. L. Briant, Acre Met., 30, 457 (1982).

25. R. F. Decker, in Steel Strengthening Mechanisms, Climax Mo Co., Greenwich, CT, 1970, p. 147.

26. F Schubert, Superalloys Source Book, ASM, Metals Paric.QH, 1984.

27. F R. Monal (ed), Superalloys Source Book, ASM, Metah Рйк, OH, 1984.

28. E. Arzt and R. F Singer, Superalloys. 1984, TMS-AIME, Wajrendalt, PA, 1984, p. 367.

29. R. R Delal. C. R. Thomas, and L. E. Dofdi, Superalloys 1984, TMS-AIME, Wanendale, PA, 1984. p. 185.

30. F L. VerSnyder and M. E. Shank, Mat. Sci. Eng, 6, 235 (1970).

К гл. 10

1. с. Н. Wells and С. R Sullivan, Trans. ASM, 60, 217 (1967).

2. C. H. Wells and C. R Sullivan, Trans. ASM, 61, 149 (1968).

3. V. Gerold and D. Steiner, Scripia Met., 16, 405 (1982).

4. H. F Merrick, Met. Trans.. 5, 891 (1974).

5. R. E. Stolu and A. G. Pineau, Mat. Sci. Eng., 34, 275 (1978).

6. A. E. Staton-Bevan, Phil. Mag., 47(6). 939 (1983),

7. C, E, Feltner and R Beardmore, Achievement of High Fatigue Resistance in Metals and Alloys, ASTM-STP 467, American Society for Testing and Materials, Philadelphia, PA, 1970, p. 77.

8. H.-P Klein, Z. Melatk., 61, 573 (1970).

9. M. Graf and E, Hombogen. Scripta Mel., 12, 147 (1978).

10. D. Foumier and A. Pineau, Met Trans. A, 8Л, 1095 (1977).

11, R. W, Landgraf, Work Hardening in Tension and Fatigue, TMS-AIME, Warrendale, PA, 1977, p. 240.

12, L. G, Fritzmeier, The Cyclic Stress-Strain Behavior of Nickel-Base Superalloy Poly- and Single Crystals, Eng. Sc. D. Thesis. Columbia University, 1984.

13, L, Remy, A, Pineau, and B. Thomas, Mat. Sci. Eng., 36, 47 (1978).

14. S. D. Antolovich, E. Rosa, and A. Pineau, Mat. Sci. Eng., 47, 47 (1981),

15, S, S. Ezz, D. R Pope, and V. Paidar, Acre Wrt 30, 921 (1982).

16, D. A. lablonski and S. Sargent, Scripia Met., 15, 1003, (1981).

17. T. R Oabb, J. Gayda, and R. V. Miner, Mel. Trans. A, 17A, 497 (1986),

18. L. F Coffin, Jr., Met. Trans., 2, 3105 (1971).

19. C. E. Jaske, R. C. Rice, R. D, Buchheit, D. B. Roach, and T, L, Porfilio, NASA CR-135022, May 1976.

20. D. N, Robinson and R A. Bartolotta, NASA CR-174836, Match 1985.

21, C. E, Pugh and D. N. Robinson, Pressure Vessels and Piping: Design Technology-1982- A Decade of Progress, ASME, New York, 1982, p. I7.

22. G. A, Swanson and R. C. Bill, AIAA Paper 85-1421, 1985.

23. A. Kaufman, J. H. Laflen, and U. S. Lindholm, AIAA Paper 85-1418, American Institute of Aeronautics and Astronautics, New York, 1985.

24. S, S, Manson, Exp. Mech., 5(7), 193 (1965).

25. B. A. Cowles, J. R. Wairen, and F K. Haake, NASA CR-165123, July 1980.

26. D, L. Anton, Acta Mel., 32, 1669 (1984).

27. G. F Harrison and M. J. Weaver, AGARD-CP-243, Advisory Group for Aerospace Research and Development, NATO. Neuilly-Sur-Seine, France, August 1978, p. 6-1,

28. C, R. Brinkman and G, E. Korth, J. Test. Eval., 2(4), 249 (1974).

29. M. Clavel, C, Levaillant, and A. Pineau, Creep-Fatigue-Environment Interactions, TMS-AIME, Warrendale, PA, 1980. p. 24.

30. J. D. Morrow, Internal Friction, Danyting, and Cyclic Plasticity, ASTM STP-378, American Society for Testing and Materials, Philadelphia, PA, 1964, p. 45.

31. B. Boursier, Evaluation of Damage Mechanisms in the Ni-Base Superalloy Ren£ 80 under Low Cycle Fatigue in the Temperature Range 75-1400 °F, M.S. Thesis, University of Cincinnati, Cincinnati. OH, 1981.

32. D. J. Duquette and M. Gell, Met. Trans., 3, 1899 (1972).

33. M. Gell, G. R. Leverant, and C. H. Wells, Achievement of High Fatigue Resistance in Metals and Alloys, ASTM STP-467, American Society for Testing and Materials, Philadelphia, PA, 1969, p. 113.

34. D. R. Chang, D, D, Kruger, and R, A. Sprague, Superalloys 1984, TMS-AIME, Warrendale, PA, 1984, p. 245.

35. R. V. Miner and J. Gayda, Int. J. Fat., 6(3), 189 (1984).

36. L. F Coffin, Jr., Met. Trans., 3, 177 (1972).

37. C. J. McMahon and L. F Coffin, Jr., Mel. Trans., 1, 3443 (1970).

38. M. H. HiRchbeig and G. R. Halford, NASA TN D-8072, January 1976.

39. W. J. Ostergren, /976 ASME-MPC Symposium on Creep-Fatigue Interaction, ASME, New York, 1976, p. 179.

40. S. S. Manson, G. R. Halford, and M. H. Hirschberg, Symposium on Design for Elevated Temperature Environment, ASME, New Yoilt, 1971, p. 12.

41. R. V, Miner, J. Gayda, and M. G. Hebsur, NASA TM-87110, September 1985.

42. K, D. Sheffler, NASA CR-134626, June 1974,

43. G. R, Leverant, T. E. Strangman, and B. S. Langer, Superalloys: Metallurgy and Manufacture. Claitors, Baton Rouge, LA, 1976, p. 285.

44. P. T. Bizon and D. A. Spera, Thermal Fatigue of Materials and Components, ASTM STP-612, American Society for Testing and Materials, Philadelphia, PA, 1976, p. 106.

45. A, E. Gemma, B. S. Langer, and G. R. Leverant, Thermal Fatigue of Materials and Components, ASTM STP-612, American Society for Testing and Materials, Philadelphia, PA, 1976, p. 199.

46. L. F Coffin, Jr, 1976 ASME-MPC Symposium on Creep-Fatigue Interaction, ASME, New York, 1976, p. 349.

47. S. MajumdarandR S. Maiya. 1976 ASME-MPC Symposium on Creep-Fatigue Interaction, ASME, New York, 1976, p. 323.

48. W, Hoffelner, Superalloys 1984, TMS-AIME. Warrendale, PA, 1984, p. 771,

49. H. F Merrick and S. Floreen, Met. Trans. A, 9A. 231 (1978).

50. S, Floreen, Creep-Fatigue-Environment Interactions, TMS-AIME, Warrendale, PA, 1980, p. 112.

51. J. Gayda, R, V, Miner, and T. R Gabb, Superalloys 1984, TMS-AIME, Warrendale, PA, 1984, p, 733,

52. B, Lawless, S, D. Antolovich, С Bathias, and В, ВоаЫа. Fracture: Interaction of Microsiruclure. Mechanisms, Mechanics, TMS-AIME, Warrendale, PA, 1984. p. 285,

53. J. E. King, Mel. Sci., 16, 345 (1982).

54. С. W. Brown. J. E. King, and M. A. Hicks, Met. Sci, 18, 374 (1984).

55. E. Hombogen and K.-H. Zum Gahr, Acta Met., 24, 581 (1976).

56. R. A. Venables, M. A. Hicks, and J. E. King, Fatigue Cracic Growth Threshold Concepts, TMSAIME, Warrendale, PA, 1984, p. 341.

57. H. G. Popp and A. Coles, AFFDL TR 70-144, Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, Ohio, 1970, p. 71.

58. H. D. Solomon and L. F. Coffin, Fatigue at Elevated Temperatures, ASTM STP-520, American Society for Testing and Materials, Philadelphia, PA, 1973, p. 112.

59. T. Ohmura, R. M. Pelloux, and N. J. Grant, Eng. Fract. Mech., 5, 909 (1973).

2i 60. P. Shahinian and K. Sadananda, /976 ASME-MPC Symposium on Creep-Fatigue Interaction, ASME,

2 New York, 1976, p. 365.

2; 61. R. B. Scarlin, Advances in Research on the Strength and Fracture of Materials (Fracture 1977), 2: vol. 2B, Pergamon, Oxford, 849.

2 62. W. Hoffelner and M. O. Speidel, Advances in Fracture Research (Fracture 1981), Pergamon, 2. Oxford, 1981, p. 2431.

2< 63. S. Golwalkar, N. S. Stoloff, and D. J. Duquette, Proc. 7th Int. Conf. on Strength of Metals and Ti Alloys, vol. 2, Pergamon, Oxford, 1983, p. 879.

28 64. D. R DeLuca, and B. A. Cowles, AFWAL-TR-84-4167, Wright-Patterson Air Force Base, Ohio,

29 February 1985.

65. J. Gayda, T R Gabb, and R. V. Miner, NASA TM-87150, September 1985.

30 66. J. M. Hyzak and I. M. Bemstein, Met. Trans. A, 13A, 45 (1982).

67. R. M. Pelloux and J. S. Huang, Creep-Fatigue-Environment Interactions, TMS-MMB, Warrendale, PA, 1980, p. 151.

3 НАУЧНОЕ ИЗДАНИЕ

4 , 5

6 КНИГА 1

Под редактей Ч.Т.СИМСА, Н.С.СТОЛОФФА

g Перевод с английского Ю.П.ЛИБЕРОВА, А.Б.ЦЕПЕЛЕВА

9 Под редакцией Р.Е.ШАЛИНА

0. Редактор издательства Па1че1ко В.А.

11. Художественный редактор Девви С.К. Технические редакторы Кулакова Э.А., Терехова М.И.

12. Корректоры Зябпва Е.А., Фетксова А.К.

,3 Лицензия ЛР NH 010157 от 04.01.92 Подписано в печать 21.07.95

.. Формат бумаги 60X88 1/16 Бумага офсетная W 2 Печать офсетная

Усл.печ.л. 23,52 Уч.-изд.л. 23,83 Усл. кр.-отт 23,52

j- Тираж 1000 экз. C-02S Заказ <091. Изд. W 2320

17 Набрано в издательстве Металлургия операторами

13 Дудкной Н., jianmiHot С, П1вче1ко В., Рыбакной Л.

19. Ордена Трудового Красного Знамени издательство Металлургия

119857 Москва, ГСП, Г-34, 2-й Обыденский пер., 14

Московская типография W 4 при Комитете Российской Федерации по печати 2- 129041, Москва, улВПереяславская, 46

СУПЕРСПЛАВЫ II

1 ... 16 17 18 19